Keep Your Tractor's Fifth Wheel with the Ideal Lubrication | EP2 Grease and Molybdenum

If you operate heavy transport in Colombia, you know that the fifth wheel of your tractor works under extreme loads, constant vibrations, and severe road conditions.

To avoid premature wear and unnecessary costs, the key is clear:

👉 Keep your tractor's fifth wheel with the ideal lubrication.

It's not just about greasing, but using the right grease, in the right amount, and with the recommended technical frequency.

The fifth wheel supports:

• Vertical loads exceeding 10 tons
• Constant metal-metal friction
• Torsional movements
• Road impacts
• Exposure to water, dust, and contaminants

Without a high-strength grease, wear accelerates and the following issues arise:

• Grooves in the plate
• Excessive play
• Vibration in the coupling
• Risk of structural failure

The correct lubrication reduces friction and protects the asset.

To keep your tractor's fifth wheel in optimal condition, the grease must meet:

The complex lithium grease EP2 is one of the most used in fleet maintenance due to its high load capacity and mechanical stability.

• Consistency NLGI 2
• Additives EP (extreme pressure)
• Dropping point above 250 °C
• Excellent mechanical stability
• Good resistance to water washout

It is an ideal option for transport fleets, tractors, and heavy machinery.

For even more severe applications, greases with solid lubricants are used, such as:

• molybdenum disulfide (MoS₂)
• graphite

These greases are designed to withstand extreme pressures and sliding movements.

• Consistency NLGI 2
• Contains solid molybdenum or graphite
• High load capacity
• Excellent wear protection
• Maintains lubrication even under extreme pressure
• Using calcium greases provides greater protection against moisture, ideal for humid environments

It is especially recommended for tractors transporting heavy loads or covering long distances.

Under normal conditions:

• Between 500 grams and 1.5 kg per application
• Frequency: every 8,000 to 15,000 km
• In severe operation: every 15 days

In active fleets, the average monthly consumption can be between:

👉 2 to 4 kg per unit

Poor lubrication increases consumption and wear.

• Completely clean the metal surface.
• Remove old contaminated grease.
• Apply new grease in an even layer.
• Completely cover the contact area.
• Check the correct coupling of the kingpin.

The key is not excessive quantity, but even distribution and the right product.

• Longer lifespan of the fifth wheel
• Less wear on the kingpin
• Reduction of vibrations
• Less corrective maintenance
• Greater road safety
• Lower cost per kilometer traveled

In heavy transport, lubrication is not an expense: it is asset protection.

If you want to avoid failures, premature wear, and unnecessary costs, the decision is clear:

👉 Keep your tractor's fifth wheel with the ideal lubrication.

Using the right EP grease, applying the correct procedure, and respecting the technical frequency can make the difference between a profitable operation and one full of unforeseen events.

Find everything you need for the lubrication of your machines with PETROGREASE.

We provide lubrication solutions so you can find everything you are looking for. Here we offer solutions that fit your problems.

Don't wait any longer!